background image

INPUT POWER LOW
CUT OFF         10.7V

Initial parameter set up

USER SET

PROGRAM

TEMP CUT OFF
ON                 20C

SAFETY TIMER
ON            10min

CAPACITY CUT OFF
ON                5000mAh

BACK LIGHT

 64%

Start Enter

This informs you of its designation

B5 will be 
operated with the 
default value of 
the essential user 
settings when it is 
connected to a 
12V battery for the 
first time. The 
screen displays 
the following 
information in 
sequence and the 
user can change 
the value of 
parameter on each 
screen. When you 
are willing to alter 
the parameter 
value in the 
program, press 
start enter key to 
make it blink then 
change the value 
with DEC or INC 
key. The value will 
be stored by 
pressing start 
enter key once.

An optional feature using temperature probe contacting the 
surface of battery, the temperature cut-off can be on or off. If it is 
on, set the maximum temperature at which the charger should 
allow battery to reach during charger. Once a battery reahes this 
temperature during charger,the process will be terminated .

When you start a charge process, the integral safety timer 
automatically starts running at the same time. This is programmed
to prevent over charge the battery if it proves to be faulty, or if the 
termination circuit cannot detect the battery full. The value for the 
safety timer should be generous enough to allow a full charge of 
the battery.

This program sets the maximum charge capacity that will be 
supplied to the battery during charge. If the delta peak voltage is 
not detected nor the safety timer expired by any reason, this 
feature will automatically stop the process at the selected 
capacity value.

The beep sounds at every time pressing the buttons to confirm 
your action. The beep or melody sounded at various times during 
operation to alert different mode changes. These audible sounds 
can be on or off.

This program monitors the voltage of input battery. If the voltage 
drops below the value you set the operation forcibly terminated to 
protect the input battery.

You can adjust the brightness of LCD screen at the charger.

INC

DEC

INC

DEC

KEY BEEP   ON

ON

BUZZER    

INC

DEC

INC

DEC

INC

DEC

-

+

INC

DEC

-

+

INC

DEC

-

+

INC

DEC

-

+

INC

DEC

-

+

INC

DEC

-

+

INC

DEC

-

+

INC

DEC

-

+

INC

DEC

B5

li-ion/Polymer Balance Charger

Содержание B5



















Отзывы: