imagistics Imagistics RS-232C, Руководство пользователя

Страница: 14 / 15

“AT” commands
Note: This is a list of standard “AT” modem commands. For more
information, please consult your fax software’s instructions.
Command Parameter Description Default value
A none Call answer
D 0 - 9, *,# Dial number
P Pulse dial
T Tone dial
, Pause
E 0 Not echo command character E0
1 Echo command character
H 0 On Hook (Disconnect line)
1 Off Hook (Connect line)
M 0 Monitor speaker is always off M1
1 Monitor speaker is on until carrier is
detected
2 Monitor speaker is always on
P none Set pulse dial mode
T none Set tone dial mode
V 0 Short formed response code V1
1 Long formed response code
Z none Reset modem
&F none Initialize to factory setting
\Q 1 XON/XOFF flow control \Q2
2 RS/CS flow control
+FCLASS? none Indicate current service class
+FCLASS=? none Indicate service class capability
+FCLASS=n none Set service class
+FRH=n none Receive HDLC frame (n=3:300 bps)
+FLO=n none XON/XOFF flow control (n=1) +FLO=2
none RS/CS flow control (n=2)
+FRM=n none Facsimile receive message
(14400/12000/9600/7200/4800/
2400 bps)
+FRS=n none Detect silence for n x 10ms
+FTH=n none Transmit HDLC frame (n=3:300 bps)
+FTM=n none Facsimile transmit message
(14400/12000/9600/7200/4800/
2400bps)
+FTS=n none Wait for n x 10ms
12