Imagine VTM-2000, Инструкция по установке и эксплуатации

Страница: 83 / 161

Global Setup Menu Functions
VTM-2000 Installation and Operation Handbook 63
Analog Output Level
The output audio level can be adjusted from -50 dB to +6 dB for analog and digital inputs
independently.
The default output level for a -20 dBFS digital input produces a +4 dBm analog output level
(600
Ω
). For example, when applying a gain adjustment of +6 dB to the output with a -20 dBFS
input signal, the audio output level will be +10 dBm i nto a 600Ω termination . The Audio
Output Level adjustment default is 0 dB.
Display Setup
The Display Setup menu is used to configure the Display colors, graticule, monitor, and time
code.
Display Colors
The display colors are used to select the colors for the background, signals, and graticules of
the VTM-2000. The colors are listed in
Table 4-10 on page 4-55. The Display Color Selection
Screen, shown in Figure 4-1 , is used to set the colors. Any color selection that is not available
is blocked out and not selectable. “X” indicates the selection on the screen.
Figure 4-1. Display Color Selection
Use the NAVIGATION knobs to select the cell for the color and function. Once selected, press
the SETUP/ENTER button to assign the color to that function. Though the same color can be
used for multiple functions, each function can use only one color. Black cells in the Display
Color Screen indicate color selections that can not be made for specific functions.
NOTE : The background color is selectable. There is a 50% reduction in the luminance level of the
background relative to the same color of other attributes (e.g. text or graticules). This is to assure a
contrast when the background color selection is the same, such as red enabled alarms over a red
background.