Imagine Versio, Руководство по установке

Страница: 35 / 78

33 Chapter 2 | System Installation
Ve r s i o H a r d w a r e I n s ta l l a t i o n M a n u a l
© 2015 Imagine Communications
Proprietary and Confidential
Chassis Components Installation
This section describes important safety guidelines, tools needed for installation, and how to access and
install chassis components.
Important Safety
Guidelines
To avoid personal injury and property damage, please read all the information
provided in
“Safety Guidelines” on page 10 , and carefully follow all the safety
steps listed in this chapter before accessing or servicing your system or its
components.
Safety Steps
Before accessing the chassis
1 Turn off all peripheral devices and the power supply connected to the
system.
2 Unplug all power cords from the system or wall outlets.
3 Disconnect all the cables and label the cables for easy identification.
4 Use a grounded wrist strap designed to prevent static discharge when
handling components.
Removing the chassis covers
After completing the above steps, you can remove the chassis covers and install
components and devices into the chassis as described in this chapter.
1 Unlock and remove the screws and fasteners to remove the covers or
components.
2 Save all the screws and fasteners for later use. (If necessary, label the
screws and fasteners for easy identification.)
3 Follow the instructions provided in this chapter to remove the chassis
covers.
Installation Tools
You will need the following tools for the safe and proper installation of your
system.
• Phillips screw driver
• Anti-static strap
Warning
This product should only be
accessed and serviced by
technically qualified personnel
or technicians.