Imagine neo adc-3981, Инструкция по установке и эксплуатации

Страница: 25 / 63

ADC-3981 Installation and Operation Manual 11
Chapter 2: Installation and Removal
Upgrading ADC-3981 Firmware
Firmware upgrading is a routine procedure that you must perform to
install newer versions of software on the ADC-3981 module. Pilot,
Co-Pilot, or Navigator software applications are required for this
procedure. You can use either the Discovery or the drag-and-drop
method. When performing the upgrading procedure, check the
appropriate readme file to confirm which files are needed. Use care to
ensure that you upload the correct files to the intended module.
If for some reason the upgrade fails, the module may not respond to
controls and will appear to be non-functional. In that event, follow the
procedures described in
“Correcting a Failed Upgrading Procedure” on
page 15 .
Upgrading the Firmware (Discovery Method)
Follow these steps to upgrade the firmware using the Discovery
method:
1. Download the most recent appropriate upgrade package from the
Leitch Web site or from your CD-ROM, and then unzip the upgrade
package.
2. If the affected module has not been discovered, perform the
Discovery operation, as described in your CCS software
application manual or online help.
3. Double-click the device icon.
The Configuration... window opens. On the Software Upgrade
tab, the /slotx/boot (where x is the slot number) directory appears
in the Select the device directory to transfer to: field.
4. Click Add, and in the Add Upgrade Files box, browse and select
the boot folder in the module’s upgrade; click OK .
The Add Upgrade Files box appears.
5. Select the file and then click OK .
6. Click Perform Transfer and then click Yes .
This may take several minutes.
7. Wait for the message File transfer to device succeeded in the
status bar.