Imagine DA-DH6804+D, Инструкция по установке и эксплуатации

Страница: 27 / 36

DA-6804
+
D
Installation and Operation Manual
15
Copyright © 2011, Harris Corporation
Table 3-4 Remotely Controlled Parameters
Bold text = Default setting [RO] = Read only/feedback
Path Parameter Range Description
Processing Serial Number [RO] String Serial number for the module
License Key String License key number for the module
Other Output Config.
„
Ch.1 1×8 with ACO
„
Ch.1 1×8
„
Ch.2 1×8
„
2×4
Selects module output configuration
as dual 1×4 or 1×8, 1 input routed to
all outputs; or 1×8 with input 2 routed
to all outputs
Ch.1 and Ch. 2 Signal
Present [RO]
„
No
„
Yes
Indicates if the input signal for the
designated channel is present
Ch.1 and Ch.2 Loss of
Input Alarm
„
Disabled
„
Enabled
Enables or disables the Loss of Input
alarm for the designated channel
Current Input [RO]
(valid in 1×8 with ACO
mode output
configuration)
„
N/A
„
Ch. 1
„
Ch. 2
Indicates if the input signal is channel
1 or channel 2
Ch. 1 and Ch. 2 Slew Rate
„
SD
„
HD
„
Auto
Controls output/rise fall time for the
designated channel
„
SD – Output rise/fall time complies
with SMPTE 259M
„
HD – Output rise/fall time complies
with SMPTE 424M /292M
„
Auto – Automatically selects proper
rise/fall time based on incoming
signal
Hysteresis 0.1 to 0.5 seconds Sets the period between loss of signal
and automatic changeover; CCS is
automatically notified
Green Mode
„
Enabled
„
Disabled
Enables or disables the use of the
power-saving (“green”) mode
Out 1A to Out 2D Cable
Fault [RO]
„
Yes
„
No
Reports termination fault or loss of
signal for the corresponding output
Ch.1 and Ch.2 Data Rate
[RO]
„
Unknown
„
270 Mb/s
„
Bypass
„
HD
„
3G
Displays the locked data rate for the
designated channel
Ch. 1 and Ch.2
Re-Clocking Mode
(DA-DHR6804
+
D and
DA-DSR6804
+
D)
„
Auto
„
270 Mb/s
„
Bypass
„
HD
„
3G
Selects the reclock rate for the
designated channel input
Ch.1 and Ch.2 Loss of
Lock Alarm
„
Disabled
„
Enabled
Enables or disables Loss of Lock alarm
on the designated channel