Imagine DA-DH6804+D, Инструкция по установке и эксплуатации

Страница: 20 / 36

Chapter 2
Installation
8
Copyright © 2011, Harris Corporation
Jumpers J1 and J2 (DA-DSR6804
+
D and DA-DHR6804
+
D)
To set the reclocker mode for the DA-DSR6804
+
D and DA-DHR6804
+
D at the
card-edge, use Jumper J1 (for channel 1) and Jumper J2 (for channel 2). The
reclocker remains in AUTO mode if no jumper is set.
Figure 2-1 Locations for Jumpers J1, J2, and J3
Table 2-1 J1 and J2 Jumper Settings
Jumper
Selection
Pin
Setting
Label Description
J1/J2
(Channel 1/
Channel 2)
1/2 AUTO_1/2 Input signal locked at one of these data rates:
„
2.97 Gb/s*
„
1.485 Gb/s*
„
270 Mb/s
If not lockable, signal automatically bypasses reclocker
3/4 3.0G_1/2 Input signal locked at 2.97 Gb/s*; if not lockable, signal automatically
bypasses reclocker
5/6 HD_1/2 Input signal locked at 1.485 Gb/s*; if not lockable, signal
automatically bypasses reclocker
7/8 SD_1/2 Input locked at 270 Mb/s; if not lockable, signal automatically
bypasses reclocker
9/10 BYPASS_1/2 Enforces signal bypass reclocker
*Not applicable to the DA-
Jumper
J1
Jumper
J2
Jumper
J3