NEXIO NX1010 Series
Hardware Guide
13
Rear Panel Port
Descriptions
The following sections describe the NX1010 series rear panel port
connections.
Do not use wire or plastic ties on cables as this can impede cable
performance. Use soft cable ties such as Velcro-based ties for wrapping
cables.
Redundant Power Supplies
The NX1010 series comes with two redundant hot swappable power
supplies located on the back panel. Under normal operation both power
supplies work in tandem spreading the load between them. In the event
of a failure, the functional power supply provides all power needed by the
NX1010. If a power supply fails or if only one power supply is connected,
an alarm sounds.
Possible reasons for alarm:
The power source (strip) has failed.
The power cord is unconnected.
The power supply module has failed.
Chapter 4: “Troubleshooting” on page 45
for solutions.
To identify and remove the failed power supply
Release
Tab
Handle
Status
LED
Figure 1-3
Power Supply Module
1
Look at the status LED on the front of each power supply. The LED on the
failed power supply will not be illuminated.
2
To remove a power supply, push the release tab to the left.
3
Hold the release tab to the left, grasp the power supply handle, and pull
the power supply out of the frame.
Содержание NEXIO NX1010 series
