NEXIO NX1010 Series
Hardware Guide
11
To rack mount the NX1010
plastic retaining mechanism
slide
rail
front rack
posts
rear rack
posts
extension
Figure 1-1
Rack Mounting
1
Attach a slide to each side of the NX1010 using (5) M10 screws. Make
sure the plastic retaining mechanism is located at the back of the NX1010.
2
Attach the extensions to the rear rack posts to match the depth of the racks.
3
Attach the rail to the rack posts.
4
Slide the NX1010 into the rail.
5
Attach the cables to the back panel of the NX1010 as shown below.
6
Turn on the NX1010.
To remove the NX1010 from the rack
1
Stand in front of the NX1010 and pull it out as far as it will go.
2
On the left slide, press down on the plastic retaining mechanism.
3
On the right slide, pull up on the plastic retaining mechanism.
For more information on rack mounting, see the Installation Quick Start
Guide for the appropriate NX1010.
Содержание NEXIO NX1010 series
