Infocaster Manager™ NM3200
Hardware Manual
Get Started
© 2014 Imagine Communications.
Proprietary and Confidential.
6/9/2014 | Page 29
GPO pins generate a TTL level trigger as configured in the application.
GPI inputs 9-14 have no internal pull-up resistors. If passive switching is required for GPI inputs 9-14 the
pull-up resistors must be added externally.
Figure 18:
GPI Passive Switch Connection
USB GPI triggers need to be added to the GPI list in the Configuration Utility before they can be used in
your application. See "External Triggers Tab" in the Infocaster User Guide for more information.
Before You Turn Your System On
After you have unpacked your NM3200 system, follow these steps before turning the system on.
Figure 19:
NM3200 Back Panel
After you have unpacked your NM3200 NM3200 system, follow these steps before turning the system
on.
1.
Connect the three power supply modules to your power source, using the included power cables.
2.
If shipped separately, please attach your NM3200 dongle to one of the USB ports.
