ImageWare Bookeye 3, Инструкция по установке и сборке

Страница: 16 / 27

Page 16 Glass Plate Setup and Assembly Manual
Each gas spring has a brake built into it, which is user adjustable. This brake can be used
to stop the glass plate from moving in any position. It has to be noted, that fastening the
brakes need more energy from the operator to lift the glass plate.
Picture 17: Setting the brake power
Adjusting the brake is done in just a few steps.
1. Lower the glass plate to the book cradle.
2. Tighten the screw which sets the brake power with an appropriate tool, e.g. a 10mm
socket wrench.
3. Repeatedly move the glass plate up and down and adjust the screws on the gas
spring.