ImageWare Bookeye 3, Инструкция по установке и сборке

Страница: 17 / 27

Glass Plate Setup and Assembly Manual Page 17
B Software Setup
B.1 Install the Software Option
The Bookeye must be configured so that the existence of the optional glass plate is known
to the device. Since the glass plate does not connect to the device electrically, some
procedures need to be performed to install it completely.
B.1.1 Install the Option Key
The glass plate option is enabled using a software key, which is part of the shipment. The
key has to be installed first to ensure the proper use of the glass plate.
If a previously purchased key is lost or missing it can be obtained again at no additional
cost at our customer service portal
http://service.imageaccess.de .
Enter the IP address of the scanner into your browser.
In the following screen go to Setup Device .
Picture 18: “Start” screen
Choose the login level Poweruser using the default password "Poweruser".
Picture 19: “Login level” screen