background image

17

10. SYMPTOM: THE SPA JET UNIT CONTINUES

TO RUN AFTER IT HAS BEEN SHUT OFF

a. To turn the main jets off, press the pump button

once. NOTE: If the actual spa water tempera-
ture is below the set temperature, or if the spa
is running a filter cycle, the heater pump/motor
will not shut off.

11. SYMPTOM: NO AIR FLOWS THROUGH THE

ADJUSTABLE HYDROTHERAPY JETS WHEN
THE AIR CONTROL IS TURNED COUNTER-
CLOCKWISE

a. The five adjustable push/pull hydrotherapy jets

can be closed and opened by pushing and
pulling the nozzles. If no air flows through the
hydrotherapy jets when the air control is turned
counterclockwise, simply pull the nozzles slightly. 

12. SYMPTOM: THE CONSOLE DISPLAYS THE

WORDS “COOL” OR “ICE”

a. This is a normal function of the spa; no action

is necessary. The word “COOL” will appear in
the display if the temperature of the water is
more than 20°F cooler than the set tempera-
ture. If this happens, the heater will automati-
cally activate to warm the water. The word
“ICE” will appear if the temperature drops
below 40°F. If this happens, the pump will auto-
matically circulate the water and warm the
plumbing.

13. SYMPTOM: THE CONSOLE DISPLAYS ONE OF

THE FOLLOWING MESSAGES: “OH,” “5n1,”
“5n3,” “FLO,” “Pd,” “O3,” “PH50,” “PH90,” or
“ILOC” 

a. If the console displays one of the messages

listed above, or if the console does not function
properly, contact our customer service depart-
ment.

Содержание IMHS63100





















Отзывы: