24
PROBLEM: The walking belt slows when walked on
SOLUTION:
a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.
b. If the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may be-
come damaged. Remove the key and
UNPLUG THE
POWER CORD FROM THE FRONT OF THE
TREADMILL
. Using the allen wrench, turn both rear
roller adjustment bolts counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each side of the walking belt 3 to
4 inches off the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord, in-
sert the key and run the treadmill for a few minutes.
Repeat until the walking belt is properly tightened.
c. If the walking belt still slows, please call our Customer Service Department, toll-free.
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION:
a. If the walking belt is off-center, first remove the key and
UNPLUG THE POWER CORD FROM THE FRONT OF
THE TREADMILL
.
If the walking belt has shifted to the
left,
use the allen wrench to turn the left rear roller bolt
clockwise 1/2 of a turn;
if the walking belt has shifted to
the right,
turn the bolt counterclockwise 1/2 of a turn. Be
careful not to overtighten the walking belt. Plug in the
power cord, insert the key and run the treadmill for a few
minutes. Repeat until the walking belt is centered.
b. If the walking belt slips when walked on, first remove the
key and
UNPLUG THE POWER CORD FROM THE
FRONT OF THE TREADMILL
. Using the allen wrench,
turn both rear roller bolts clockwise, 1/4 of a turn. When
the walking belt is correctly tightened, you should be able
to lift each side of the walking belt 3 to 4 inches off the
walking platform. Be careful to keep the walking belt cen-
tered. Plug in the power cord, insert the key and carefully
walk on the treadmill for a few minutes. Repeat until the
walking belt is properly tightened.
PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com
CD’s and videos are played
SOLUTION:
a. With the key in the console, press one of the Incline buttons.
While the incline is changing, re-
move the key.
After a few seconds, re-insert the key. The treadmill will automatically rise to the
maximum incline level and then return to the minimum level. This will recalibrate the incline.
Rear Roller Adjustment Bolts
3”–4”
b
a
b
Содержание Executive 20002
Страница 27: ...27 NOTES...
