background image

4

Weight

Storage

Tube

Seat

Upright

Weight Guide

Weight Glider

Barbell

Safety Spotter

Right Side

Left Side

Note: The terms “right side” and “left side”
are determined relative to a person sitting
on the bench. They do not refer to right and
left on the drawings in this manual.

Adjustment

Bracket

Backrest

Thank you for selecting the versatile IMAGE

®

3.8

weight bench. The IMAGE

®

3.8 is designed to help you

develop every major muscle group of the body.
Whether your goal is a shapely figure, dramatic mus-
cle size and strength, or a healthier cardiovascular
system, the IMAGE

®

3.8 will help you achieve the spe-

cific results you want.

For your benefit, read this manual carefully before
using the IMAGE

®

3.8 weight bench.

If you have

additional questions, please call our toll-free HELPLINE

at 1-800-736-6879, Monday through Saturday, 7 a.m.
until 7 p.m. Central Time (excluding holidays). To help
us assist you, please note the product model number
and serial number before calling. The model number is
831.159700. The serial number can be found on a
decal attached to the IMAGE

®

3.8 (see the front cover

of this manual).

Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.

Before You  Begin

Содержание 3.8



















Отзывы: