XLED-6MPCW
USER’S MANUAL
Keep the monitor a good distance from any wall to increase
circulation of air. Increased internal temperature may result in fire,
electric shock or equipment damage.
More than 10
o
More than 10
o
To avoid injury by tipping over, set the monitor to the following tilted
position before moving.
Warning to service technician
Suitable marking provided on the equipment shall be provided in the servicing instructions
to alert a SERVICE TECHNICIAN to a possible hazard, where both of the following conditions
exist :
y
Fuse is used in the neutral of single-phase equipment either permanently connected of
provided with a non-reversible plug.
y
After operation of the fuse, parts of the equipment that remain energized might represent
a hazard during servicing.
2. USAGE WARNING
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
Power supply :
AC100-240V~, 50/60Hz, 4.0A~2.0A
Make sure to plug the power cord in until it is firmly inserted. When
disconnecting the power cord, make sure to hold the power plug when
pulling the plug from the outlet. Tugging on the cord may damage and
result in fire or electric shock.
