Image Access WideTEK 36 DS, Инструкции по установке

Страница: 17 / 46

Prepare for Setup
17
Prepare for Setup
Connect the Power Supply
WARNING
Risk of electric shock due to incorrect connection.
➢
Ensure that the power receptacles intended for the
connection are properly grounded.
➢
Ensure that the power receptacles intended for the
connection of the scanner are properly fused.
CAUTION
Incorrect laying of the connection cables can cause tripping.
Fractures, contusions and bruises can be the result.
➢
Place the connecting cables so that nobody can trip over
them.
To connect the power supplies, proceed as follows:
➢
Make sure that the main switch of the scanner is switched off (0
position).
➢
Use only the AC adapters and power cords supplied.
➢
Ensure the power cords are not damaged.
➢
Connect the connectors from the power supplies to the associated
24 Vdc connectors on the left of the scanner.
➢
If not already done, connect the supplied power cables to the
associated connectors on the power supplies.
➢
Connect the power plugs of the power supplies to power receptacles of
the correct voltage (100-240 Vac).
Establish the Network Connection
CAUTION
Incorrect laying of the connection cables can cause tripping.
Fractures, contusions and bruises can be the result.
➢
Place the connecting cables so that nobody can trip over
them.