System Restore
38
System Restore
Step Action
1
Open a tab in a web browser and enter the IP address of the
scanner.
2
The Scan2Net window appears.
3
Click SETUP DEVICE, and then click POWERUSER.
4
Enter "Poweruser" as the username and password.
5
Select SYSTEM RESTORE from the RESET & DEFAULT VALUES menu.
6
Select RESTORE SYSTEM.
The unit restarts immediately. The system recovery is then performed. This
procedure takes approximately 1 - 2 minutes. To complete the procedure,
the device performs a second restart of the restored system.
End of the system recovery procedure.