29
USER
INSTRUCTIONS FOR USE
– Use of the induction hob
The purpose of the booster function is to give more power to a determined area in or-
der to reduce the necessary cooking time. This function is activated by turning the knob
clockwise from position 0 (off) to the final position (* fig. A). After short acoustic signal,
the symbol [P] appears on the display, meaning that the booster function is activated.
The Booster function has a maximum duration of 10 minutes. The area concerned then
returns to level [9].The Booster function ends before this time when:
- a lower power level is set;
- the pan is removed;
- there is overheating of the appliance or of the heating area.
The Booster function has precedence over the “Heat-up” function.
Each cooking area is designed to operate with specific pans for induction cooking,
having a diameter just smaller than the diameter of the chosen cooking area. If the
pan is not suitable, the display for the area shows the symbol indicating absence of the
pan (U) and the appliance does not start up. This prevents the appliance from being
switched on until a container is placed on the cooking area, or until a container sui-
table for induction is used. If the container is removed during the operation, the area is
switched off. The duration of pan recognition is 10 minutes; if no suitable container is
used on the cooking area during this time, the area is switched off. The area display
changes from the [ U ] symbol to the [ - ] symbol.
If the cooking area is still very hot, even though it is switched off, the symbol H appears
on the display.The Heat-up function, or quick heating, is available on each cooking
area. This means that for a well-defined time the cooking area works at maximum
power and at the end of this time the power is automatically brought to the set level.
In this case the duration depends on the selected power level. The Heat-up function is
activated by turning the knob counterclockwise from position 0 to the final position (*
fig. A) for 2
seconds. After short acoustic signal, a letter [A] is shown on the display for the
correspondent area. After it has been activated you must set a power level to continue
cooking within 10 seconds; if this is not done, the Heat-up function is interrupted.
The Key-lock function is useful if there are children at home. However, it is always ad-
visable for an adult to be pre- sent when the appliance is in operation. When the Key-
lock function is activated all the cooking areas are switched off and they cannot be
switched on accidentally
Position the pan in the centre of the 2 left areas (1,2) by simultaneously turning the
knobs of the two areas concerned clockwise beyond the limit switch for 3 seconds and
the BRIDGE function is activated.
Then you can adjust the power of the two areas with just the left knob.
The pan used must have a size that covers both centres of the two areas.
Booster function
fig. A
Recognizing the
presence of a pan
Residual heat indication
“HEAT-UP” function
KEY-LOCK function
Function BRIDGE
4 or 6 zones models only
Attention
*
Содержание MAJESTIC M09
Страница 68: ......
