ILVE stoves, wall ovens and cooktops feature
many advanced cooking components and
safety refinements. However before using
your oven for the first time the following
installation check must be carefully carried
out and oven elements must be burnt in.
■
Check that your ILVE installer has screwed the oven into its
cavity and that all packaging is removed from inside oven.
■
Check that all oven racks are in place.
Rack Positions
ILVE ovens are equipped with
various racks depending on
the model and size; all ILVE
wire racks are reversible. They
have angled offset ends to allow for height variation between
shelves; this is a particularly useful feature when cooking with
deep dishes, for large roasts or when batch cooking.
Burning in elements
It is necessary to burn the protective oils that are used in
manufacturing and shipping from the elements.
1 Set the clock to the correct time (See page 12)
2 Set oven temperature control knob to 125º C and select
cooking function mode 2 by turning function control knob.
3 Allow to burn in for 10 to 15 minutes.
4 Repeat process for all seven cooking modes (3 through 8)
in sequence and allow to burn in each mode for 10 to
15 minutes.
5 Clean the oven thoroughly when you have completed burn in
process so that the oven and grill/rotisserie will be ready
for use in cooking.
■
There may be a slight unpleasant odour during the initial
burn off procedure. As a result we advise you open doors
and windows in the kitchen during this procedure.
Installation
Features
Cavity Cooling Fan
ILVE ovens are equipped with a
cavity cooling fan. The fan is
thermostatically controlled and
will switch on automatically when
the oven cavity reaches a
temperature of 60º C. Air will
gently be blown out through the
front louvre, just above the oven
door handle. This keeps the
interior of the cavity housing cool.
Cooktop
ILVE’s gas burners feature high
thermal efficiency, economical
energy consumption and
precision temperature settings,
allowing you to not only have
total control over cooking
temperatures but instant
response in temperature
changes and automatic
ignition. All ILVE cooktops meet
the highest standards of
operational efficiency required
for approval by the Australian
and European Gas Association.
Hob Burners
ILVE’s quad ring high intensity
burner is a high speed, high
temperature burner rated at
19.4 Mjh. It has a broad
diameter to provide even heat
across a maximum surface area
of a wok or frying pan allowing for
cooking efficiency and elimination
Normal Position
Reversed Position
