OPERATIONAL INSTRUCTIONS
Compact Disc Operation
- continued
3. Press
REPEAT
three times to have all the inserted CDs (up to 4)
played continuously.
Track selection
Press
SKIP/SEARCH
and
TUNING – SKIP/SEARCH
to select the desired tracks.
The tracks can be selected directly by pressing the corresponding numerical buttons
1 - 0 / +10
.
The selected number appears on the display. If the CD player is in stop mode, play starts automati-
cally when a track is selected using the numerical buttons.
Search operation
While the CD is in play mode you can scan tracks by holding down
SKIP/SEARCH
and
TUNING - SKIP/SEARCH
. The CD will continue to play until you find the track you want.
When you release the button the unit will resume normal play mode.
Track intro-scan
1.
Press
INTRO
while in stop mode to play the first 10 seconds of each track on all inserted CDs.
2.
Press
INTRO
again and the selected track will play.
Mute function
If the
MUTE
button is pressed, the audio output will be muted, and the “MUTE” indicator will be
displayed. To cancel “MUTE” press the
MUTE
button once more or press the
VOLUME UP/DOWN
button.
Program memory
The built-in program memory lets you play up to 40 tracks
(from up to 4 CDs) in the order of your choice. A track can be stored
more than once within the program.
1.
Load the CDs.
2. Press
MEM./CLK ADJ.
(22)/(53) in the stop mode to switch to
programming mode.
OPERATIONAL INSTRUCTIONS
Compact Disc Operation
- continued
3. Select a CD by pressing the corresponding
DISC 1 - 4
button.
4.
Select the desired track using the numerical buttons
0 - 9 / +10
on
the remote control or by repeatedly pressing
SKIP/SEARCH
and
SKIP/SEARCH
.
5. Press
MEM./CLK ADJ.
to save the track in the first program location.
For example, if you selected CD 1, track number 14, it will appear in
Program position 1 as shown below.
6. For the next program position, reselect this or another CD and select a track.
7.
Confirm the selection using the
MEM./CLK ADJ.
button.
8.
To program other tracks in the memory, repeat steps 3 - 7.
9.
To play the program, press
PLAY/PAUSE
. The program can be played back again as long as
MEMORY
appears on the display.
To clear the programming and resume normal playback
The programming is erased by pressing
STOP
until the
MEMORY
display disappears, or by open-
ing the CD changer door. If the unit is switched off, the program is not erased.
Note
:
1.
RANDOM
will not function in programmed play.
2.
This unit counts all the folders on an MP3 disc, even if a folder doesn’t contain any MP3 file(s).
If you select a folder which doesn’t contain any MP3 file(s), the unit will automatically skip to the
next folder until it finds one containing an MP3 file(s).
iLuv | 24
i9300 | V10M10_IM_EN_11112008
23 | iLuv
