Colorist™ Panel 36Qa QRG
EN
3
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
Power Linking
You can link up to 6 Colorist™ Panel 36Qa products at 120 V;
11 at 208 V; or 12 at 230 V. Never exceed this number. Power linking cords
can be purchased separately.
IP65 Power
Cable Table
Connection
Wire (U.S.)
Wire (Europe)
IP65 Pin
AC Live
Black
Brown
1
AC Neutral
White
Blue
2
AC Ground
Green/Yellow
Green/Yellow
3
IP65 Power
Connector Pins
When connecting the Colorist™ Panel 36Qa to local power, it may be
necessary to use the local-to-IP65 adapters supplied with this product.
DMX Linking
The Colorist™ Panel 36Qa will work with a DMX controller using a regular
DMX serial connection. A DMX Primer is available from
www.iluminarc.com
.
DMX Connection
The Colorist™ Panel 36Qa uses a regular DMX data connection for its
DMX personalities:
4-CH
,
6-CH
, and
10CH
. See the User Manual to
connect and configure for DMX operation.
IP65 DMX Cable
Table
Connection
DMX (U.S.)
DMX (Europe)
IP65 Pin
Ground
Shield
Shield
1
Data +
Red
Brown
2
Data -
White
Blue
3
IP65 DMX
Connector Pins
To connnect the Colorist™ Panel 36Qa to your DMX network, it is
necessary to use the 3-pin to 5-pin adapters supplied with this product.
When not using the Power Output, DMX Input or DMX Output
connectors, you must seal the cable ends with the supplied caps.
F
emale Power IP65 Connector
Male Power IP65 Connector
F
emale IP65 (DMX Output)
Male IP65 (DMX Input)
