background image

© Copyright 2022, ILUMINAR Lighting

Subject to change without notice.

2

Make sure the power cord is correctly connected and the lamp is securely in place.
Disconnect the fixture from the power supply prior moving the unit or performing any maintenance or 

lamp changes.
DO NOT open the ballast case, it will void the warranty.
DO NOT support the ballast by power cord(s). These cords/connections are not designed to bear weight.
DO NOT make contact with the interior of the socket while power is on.
DO NOT attempt to rewire, alter, modify or reconfigure your system - this will void the ILUMINAR 

warranty and could create serious safety hazards, or cause bodily injury or death, as this is a high 

amperage and voltage device. 
DO NOT submerge in water.
DO NOT plug the system into untested or unidentified voltage other than what is designated on ballast.
DO NOT CONNECT A CMH BALLAST to a Flip Box. It will void the warranty and can cause electrical 

failure within the CMH Ballast. Flip or Switch Boxes are not recommended for any CMH Units or for any 

high wattage ballasts. 
DO NOT plug or unplug the lamp cord while the ballast is connected to power.
Make sure to wear proper gloves to protect from the transfer of oil from the skin to the lamps glass 

surface.
When changing out the lamp, make sure that the lamp has time to cool before touching.
Make sure the lamp is correctly locked into the socket, properly securing the lamp.
If the lamp is damaged in any way (cracked, loose internal connections) replace the lamp immediately.
Keep away from Children. This product contains delicate electronic components. If it is placed near 

an object that transmits radio signals, it could cause interference (i.e.: mobile devices, walkie talkies, 

CB radios, remote controls and microwaves). If interference occurs, move such objects away from the 

appliance.

WARNINGS

THANK YOU

 for purchasing an 

ILUMINAR Lighting CMH FIXTURE

. We strive to deliver the best 

customer service alongside world-class products and we go above and beyond to make sure you are 
satisfied with your purchase. The following is a general set of warnings and basic guidelines for the 
ILUMINAR Lighting CMH DE Fixture. Always have an expert install your product(s).

KEEP ORIGINAL PACKAGING

 

In the event of a return, products will need to be in the original ILUMINAR Lighting packaging to avoid 
product damage during shipping. Any damage to products not in their original packaging will not be 
covered under the Warranty. Visit iluminarlighting.com/warranty for more detailed information.

SAFETY 1ST

FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN ELECTRICAL SHOCK AND 
SERIOUS INJURY. Additionally, failure to follow these safety warnings can/will result in a void of all 
warranties as well as any manufacturer liability. 

Please read carefully prior to beginning installation.

Содержание DE CMH FIXTURE









Отзывы: