iLumi MeshTek-H51, Быстрый старт

Страница: 9 / 13

MESHTEK-H51
ilumi solutions, inc. www.ilumisolutions.com
P a g e 9 | 12
5. REGULATORY APPROVAL
5.1. European Union regulatory compliance
The MESHTEK-H51 module conforms to the product specifications listed in below Table 3.
Table 3: MESHTEK-H51 European Compliance Testing
Certification Standards Article Laboratory
Report
Date
Number
Safety EN 60950-1:2006 (2ND Edition) & IEC 60950-1:2005 [3.1(a)]
ELECTRO
MAGNETIC
TEST, INC., USA
M150417S1 April 17, 2015
Health EN 62479:2010 M150417E2 April 17, 2015
EMC EN 301 489-1 & EN 301 489-17 [3.1(b)] M150407D2 April 23, 2015
EN 55022 Class B, EN 61000-3-2 Class A,
EN 61000-3-3, & EN 55024
M150406D1 April 23, 2015
Radio ETSI EN 300 328 V1.9.1 (2015-02) (3.2) M150417E1 April 17, 2015
5.2. FCC and IC Compliance
The MESHTEK-H51 module conforms to the product specifications listed in below Table 4.
Table 4: MESHTEK-H51 FCC and IC Conformity
Standard
FCC FCC part 15 modular certification
MESHTEK-H51 FCC ID: 2AEHU-ILUMIBLEH
IC Industry Canada RSS-210 modular certification
MESHTEK-H51 IC: 20059-ILUMIBLEH
Bluetooth RF-PHY Component (Tested); QDID: 71365
5.2.1. FCC Statement
This device has been tested and found to comply with part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause undesired
operation.