Ilumen
Installation Manual Ilumen PIDbox Mini v2.0
10)
Turn the DC switch from the inverter back on
9
D
ECOMMISSIONING
9.1
D
ISASSEMBLING THE
PID
Switch off the Ilumen PIDbox mini
for minimum 20 minutes. Make sure the AC cannot be plugged in again.
switch from the inverter and wait
the PV arrays and then disconnect the lines going to the inverter.
are disconnected you can dismount
When doing any kind of work on the
power plug from the device before
9.2
P
ACKING THE
PID
BOX MINI
To pack the PIDbox mini use the original packaging or packaging suitable for the weight and
dimensions of the PIDbox mini
9.3
D
ISPOSING OF THE
PID
Dispose of the PIDbox mini at the end of its service life in accordance with the disposal
regulations for electronic waste currently applicable at the installation site.
Ilumen PIDbox Mini v2.0-EN
Turn the DC switch from the inverter back on followed by the AC side of the PV plant
11)
ECOMMISSIONING THE
I
LUMEN
PID
S
OLUTION
PID
BOX MINI
mini. Disconnect the Ilumen PIDbox mini from the AC grid. Wait
0 minutes. Make sure the AC cannot be plugged in again. Disconnect the DC
switch from the inverter and wait until it is discharged. Disconnect all DC connectors going to
disconnect the lines going to the inverter. When all electrical connections
dismount the Ilumen PIDbox mini.
When doing any kind of work on the PIDbox mini, always disconnect the DC
power plug from the device before unplugging any PV-cables.
BOX MINI
se the original packaging or packaging suitable for the weight and
(see Section 12 "Technical Data").
PID
BOX MINI
at the end of its service life in accordance with the disposal
regulations for electronic waste currently applicable at the installation site.
3
7
8
19
followed by the AC side of the PV plant
from the AC grid. Wait
Disconnect the DC
DC connectors going to
all electrical connections
, always disconnect the DC
cables.
se the original packaging or packaging suitable for the weight and
at the end of its service life in accordance with the disposal
