Ilsco TaskMaster TB-PMP, Инструкция по эксплуатации

Страница: 18 / 24

Pg. 18
TB-PMP
RETURN ADJUSTMENT DIAL
Turn dial counter clockwise to align with 0 for no retraction.
Turn dial clockwise to align with A for maximum retraction of 10 seconds.
OPERATING THE PUMP
To advance cutter or compression tool, push + button on remote. Keep pushing the
button to complete your cycle and retract to set position. If the dial is set to 0, the pump
will stop once the cycle is complete and will require manual retraction using the remote
control unit. The service light LED will also turn green momentarily to indicate that the
appropriate pressure was reached.
NOTE: Before uncoupling any tool, be sure the ram is fully retracted or you will lose oil
from pump.
.
.
A
0
A
0
.
.
Maximum retraction of 10 seconds No retraction (can use remote control
unit for retraction)