Ilsco TaskMaster TB-PMP, Инструкция по эксплуатации

Страница: 16 / 24

Pg. 16
TB-PMP
10. Operating Instructions
Be sure to read instructions carefully, wear safety goggles, and keep fingers away from moving
parts.
ATTACHING THE BATTERY TO THE PUMP
1. Insert battery into opening at rear of pump by squeezing battery side buttons, and pushing
battery in. Battery will click into place.
2. To remove battery, squeeze side buttons and pull battery out.
TURNING THE PUMP ON/OFF
Press the + button on the remote control unit (The LED light will turn on within a few seconds)
NOTE: The pump turns off automatically after 3 minutes of no activity.
Click!