LiftLyte Operating Manual - DCNMAN101814 Rev. 3
5
5
Maintaining LiftLyte
™
Follow these maintenance guidelines to keep your LiftLyte
™ in good working condition.
To remove any film or oil, periodically wipe the Light Strips with a clean cloth dampened with potable
water and mild detergent (dish soap).
Periodically inspect the power cords for chaffing, cuts etc.
LiftLyte
™ Safety Considerations
Before supplying power to your LiftLyte
™ carefully fully raise and lower the lift several times to be
certain there are no interference points that could damage (pinch, cut, chafe, crush etc.) any of the
components of your LiftLyte-M
™ or, could prevent the full range of motion of the lift.
Be sure all AC Transformer Power Supply cords and your extension cord are safely secured using
the supplied zip ties and mounts.
Always review the location of all components of your LiftLyte
™ before installing or removing a vehicle
from the lift.
Regularly inspect all components of the LiftLyte
™ for any possible damage.
If welding or using a torch in the vicinity of your LiftLyte
™ use care to prevent open flame or molten
metal from coming into contact with any component of the LiftLyt
e™.
LiftLyte
™ Technical Specifications
Standard Light strip
Watts
– LiftLyte 1000 model 36W, LiftLyte 1003 model 43W
Amps
– LiftLyte 1000 model 3.0A, LiftLyte 1003 model 3.6A
Voltage
– 12V -15V
Length
– LiftLyte 1000 model 2 x 140”, LiftLyte 1003 model 2 x 170”
Viewing Angle - 120°
Typical System Lumens 125 lm per foot
– 1000 model total Lm (
2900lm
), 1003 model
total
Lm (
3500lm
)
Color temperature
– 6000K – 7000K
Magnets
– Neodymium N42
Protective Sheath
– Vinyl with UV, anti-blushing, anti-fungicidal inhibitors
Listings - UL CE ROHS
Life Expectancy
– 30,000 hrs.
Power
S
upply
Watts
– 60W
Voltage - Input 100V
– 240V 1.2A, Output 15V 4.0A
Hertz
– 50/60
IP64
Class 2
Listings
– UL CE ROHS
Common US 120V plug with switch Standard