iLiving ILG8WD24-1W, Руководство пользователя

Страница: 9 / 14

9
If mounting on a concrete wall, be sure to locate a structurally solid and secure
location to hold the weight of the fan assembly and use suitable concrete anchors
(not provided ) to mount the base to the wall.
WALL MOUNT BRACKET/ MOTOR ASSEMBLY
1.
Remove the 2 bolts, washers and nuts from the
mounting bracket.
2.
Align the holes on the mounting bracket with the
holes in the motor flange on the motor assembly.
3.
Insert the bolts and replace the washers and nuts
removed in step 1.
4.
Tighten the position bolt and nut.
CAUTION: BE SURE TO SECURE THE KNOB.
MOTOR / REAR GRILLE & BALDE
ASSEMBLY
1. Removed the 4 nuts, spring washers
and flat washers from the bolts
around the motor shaft.
2. Carefully slide the rear grille over the
bolts.
3. Secure with the flat washers, spring
washers and nuts removed in Step 1.
4. Carefully slide the blade assembly
over the shaft and align the inner hex
head driver provided with the slot on
the shaft of the motor.
5. Tighten the blade assembly
with the hex head screw using the
hex head driver provided with the
fan.
NOTE: Keep the hex driver for
future use.
CAUTION: DO NOT ALTER THE
ANGLE OF THE BLADES.
6. Hang front grille on top rib of rear
grille by utilizing the hook.
7. Snap the front grille into the rear
grille to secure.