iLiving ILG8WD24-1W, Руководство пользователя

Страница: 8 / 14

8
4. Insert the blade into the motor
shaft until it reaches a stopping
point and the set screw is in line
with the flat groove on the
motor shaft.
NOTE:
Make sure the blade’s set
screw is facing the motor. You may
need to loosen the set screw at the
rear of the blade to slide it onto the
shaft.
5. Firmly tighten the blade’s set
screw with the spanner (not
supplied).
CAUTION
: Do not alter the angle of
the blades.
6. Hang front grill on top rib of rear grill by utilizing the “U” shaped fixed clip at top
of front grill rim.
For the Washdown Rated Stainless Steel Wall Mounted Fan
(Model: IILG8WD24-1W & ILG8WD30-1W)
MOUNTING BASE ON A WOOD FRAMED WALL
1. Located a wall stud secure and solid enough to hold the weight of the base
assembly. Carefully located and mark the center of wall stud. If you do not have a
solid structural framing member at that location then you must provide an
adequate alternative for mounting the fan.
2. Place mounting bracket against the wall centered with the centerline of the wall
stud and 4 holes.
3. Drill 4 holes on the wall and secure bracket to wall using 4 lag screws
（
not
provided
）
.