YOUR CAMERA IS N O W LOADED AND YOU
Step 5. Ensure that the sprockets are engaged with
the film perforations. Turn the take-up spool with
the thumb to take up the tension of the film on
the spool. Your loaded camera should look like
this. Now close the back, making sure the film
does not spring away from the sprockets and push
it so that it snaps shut.
Step 6. Operate the film winding lever
(3)
as far as
it will go. Now press the shutter release button
and operate the film winding lever two or three
times each until the picture counter (6) indicates "1"
.
Check that the rewinding knob and crank
(8)
turn, as you wind on the film. Keep left hand clear of
rewind knob as you wind on, to avoid damage to film.
Step 7. Now set the film type reminder disc (2).
ARE READY TO TAKE YOUR FIRST PICTURE
STEP 5
STEP 6
STEP 7
