Ildvr Digital Technology USA INC-M13 series, Руководство пользователя

Страница: 27 / 41

27
Auto delete old files when storage device gets full: when the storage capacity of SD card is used up, the device will delete old files automatically. The way to delete old files: first delete the
files of the earliest date, if the space is still not enough, then delete the files of the earliest date but one, then go on like this if necessary. If the record files are taken on the current date,
then first delete the files of the earliest hour. But files of the current hour cannot be deleted, if the disk gets full in one hour, the device will stop recording and capturing images. After the
one-hour session ends, system will delete the files of the hour and continue to record and snap.
Scan the disk when device starts: check SD card or not when INC-M20xx starts.

Note:
1 Hot-plugging is not recommended for SD card, compulsory hot-plugging may damage the SD card, causing data loss or abnormal operation.
2 As disk formatting needs to take a long time, don't stop power supply during the process.
3 ext2 file is used to format system by default.
4 Storage INC-M20xx doesn’t support hard disk that is formatted into logical partition or multiple partitions, so it is recommended to format the hard disk into only one main partition.
After setting all the parameters, click [save] to make the parameters valid.
5.7.2 Record Schedule
Below picture is the “record schedule” page of INC-M20xx:
[Device Record Schedule]: set the period of scheduled recording, any period of each day can be set up.
[Record file storage mode]: set to save scheduled recorded files to FTP server via FTP uploading,
FTP server can be set up in [FTP settings]
.
Note: record files are saved via FTP uploading. HDD or SD card is needed for cache memory support, otherwise record files will be overwritten by new files due to insufficient cache memory
space.
After setting all the parameters, click [save] to make the parameters valid.
5.7.3 Snap Schedule