Ildvr Digital Technology USA INC-M13 series, Руководство пользователя

Страница: 19 / 41

19
UPNP NIC: the type of NIC connecting UPNP server.
UPNP Mode: specified mode and auto mode:
Specified mode means to specify data mapping port and web mapping port to server.
Auto mode means data mapping port and web mapping port are set up by server.
UPNP server: gateway address of IP server with UPNP function.
[
RTSP setting ]: check RTSP switch to enable RTSP function, the default RTSP port is 554.
After setting all the parameters, click [save] to make the parameters valid.
5.4 Video Settings
Below picture is the “Video Coding” page of INC-M20xx:
In here, refer to some words need to explain.
[Coding]: Select H.264 or MJPEG compress.
[Definition]: set definition of images, modes supported are:
PAL mode – four definitions formats: D1 (704*576)/Half-D1 (704*288)/CIF (352*288)/QCIF (176*144)
NTSC mode – four definitions formats: D1 (704*480)/Half-D1 (704*240)/CIF (352*240)/QCIF (176*120).
[Image Quality]: users can choose the right quality according to their needs: Best, Good, Normal, and the parameters can also be user-defined by checking [advanced settings] checkbox.
[I frame interval]: adjustable between 5
～
200.Smaller I frame interval means higher image bit-rate and better image quality. It is recommended to set the frame interval as above 25.
[Frame Rate]: set encoding frame rate per second. Under poor network condition, frame rate can be reduced to control encoding bit-rate to make motion images flow more smoothly.