Ildvr Digital Technology USA INC-M13 series, Руководство пользователя

Страница: 20 / 41

20
[Rate control]: CBR and VBR are optional. CBR adopts constant encoding bit-rate; VBR adopts variable encoding bit-rate.
[Bit-rate]: the range of preferred and alternate stream is 30~16384Kbps.Higher bit-rate setting can generate better image quality, but it occupies more bandwidth, please adjust the setting
according to your actual bandwidth.
Under CBR setting, [Bit-rate] is the constant bit-rate of encoding.
Under VBR setting, [Bit-rate] is the variable bit-rate of encoding.
[Image quality]: Under CBR setting, bit-rate range is set via [Image quality], 1 means that bit-rate range is control by the software, 2~6 stands for a bit-rate range of ±10%
～
±50%
Under VBR setting: set image quality via “Image Quality”, smaller value of image quality means better quality and higher bit-rate, but the bit-rate will not exceed its set value.
[LAN default value]: I frame interval: 100, frame rate: 25, bit-rate: VBR, 2048kbps, image quality: 2
[WAN default value]: I frame interval: 25, frame rate: 5, bit-rate: CBR, 384kbps, image quality: 4
Note: Non-professional users please use “Advanced Settings” with caution
[Video Masking On/Off]: enable or disable video masking.
[Mask Area Setup]: right click and move cursor to set image masking area, an image can be entirely or partially masked, maximum 4 areas supported.
[All]: mask the whole image.
[Clear]: clear masked areas.
[Parameter setup for snapping function]: supports only images of JPG format currently, definition is the same as set in [video definition].
After setting all the parameters, click [save] to make the parameters valid.
5.5 Audio Settings
See below picture for “INC-M20xx Audio Settings”:
[Input type]: select your audio device input type mic or line in.