16
Maintenance
Post-Dive
1.
Rinse the housing in fresh water. Rotate the housing’s controls and
press each button while submerged in fresh water to flush out any
salt or debris to ensure smooth operation on future dives.
2.
NEVER leave your housing in the fresh water rinse tank. Collisions
with other peoples’ gear can cause scratches or damage to your
equipment.
3.
Stow the housing in a shaded place where it is protected from
impact or overheating. If no shade is available, we recommend
covering the housing with a towel or cloth.
4.
Check the memory card capacity and battery life of your camera
and strobe(s). Recharge as necessary.
5.
Always recheck o-ring seal after opening the housing.
Travel and Storage
1.
Remove the camera from the housing for travel or storage.
2.
Check the main housing o-ring.
3.
Close the empty housing and submerge in lukewarm fresh water.
While submerged, rotate each control and depress each button to
flush out any salt or debris.
4.
Remove the housing from water and rinse with running water.
5.
Do not rinse the inside of the housing or submerge the open
housing in water. If the inside of the housing needs to be cleaned,
wipe with a clean, slightly damp cloth.
6.
Dry the housing with a clean, lint-free cloth.
7.
Store in a cool, dry place.
