2222
Strobe Mount
Wing Nut
Rubber
Gaskets
Ikelite
Substrobe
Release Button
Stem
Strobe Arm
Release Handle
Knuckle
Knuckle
Arm
Wing Nut
2211
D
DIIFFFFU
USSEERR #
#00559911..33
The white diffuser can be secured to the front of the DS125 strobe when softer
lighting or coverage greater than 90° is desired. The diffuser reduces the strobe output
by one full f-stop while increasing the coverage angle to 100°.
D
DIIFFFFU
USSEERR IIN
NSSTTAALLLLAATTIIO
ON
N ________________________________________________________________________________________
1. The diffuser features three protruding ears for use in installation and removal.
The protruding ears on the diffuser should be positioned away from the strobe.
2. Note the three cut-outs around the perimeter of the diffuser and the three tabs inside
the perimeter of the DS125 strobe front. Place the diffuser over the front of the
strobe, and rotate the diffuser so that the cut-outs align with the tabs on the front.
Insert the diffuser thru the tabs, and then rotate the diffuser so the tabs on the front
lock the diffuser in place.
3. To remove the diffuser, rotate the diffuser so the cut-outs align with the tabs on the
front. Grasp the protruding ears on the diffuser to remove.
4. A lanyard can be attached to the diffuser by threading it thru the two circular
openings on the diffuser.
U
USSEE O
OFF TTH
HEE D
DIIFFFFU
USSEERR______________________________________________________________________________________________
The diffuser reduces the light intensity by one full f-stop. When referencing the
exposure guide information on the previous page, reference one less f-stop (one number
greater) when the diffuser is secured to the DS125.
For the
TTTTLL//AAuuttoo eexxaam
mppllee
with ISO 100 film, if you select f-8
w
wiitthhoouutt
the diffuser,
you can shoot subjects up to 1.2m (4’) away as stated on the previous page. If you
aadddd
tthhee ddiiffffuusseerr
to the strobe with the camera set at f-8, then reference one less f-stop (one
number greater) than f-8 in the chart which is f-11, meaning you can shoot subjects up
to 0.9m (3’) away.
DS125
Substrobe DS125 Front
Modeling
Light
Flash
Tube
Flash
Diffuser
Protruding
Ear
Holes
for Lanyard
Tab
Cut-out
Hole for
Diffuser
Lanyard