18
4.
Carefully screw in and tighten accessory fitting. The accessory port
features a 1/2-20 threaded hole. Make sure your fitting is the same
thread pattern. DO NOT cross-thread. DO NOT overtighten.
5.
After installing an accessory, pressure test the housing by diving
without a camera inside.
NOTICE: Your Ikelite housing warranty DOES NOT extend
to cover the attachment of aftermarket housing accessories
or accessory fittings by 3rd parties. Warranty DOES cover
factory optional accessories attached by certified Ikelite service
technicians.
»
DO NOT remove the Accessory Port Hole Plug unless you are
installing a compatible accessory like Vacuum Kit # 47012.
Wide angle and macro close-up
The optional WD-4 Wide Angle Dome # 6430.4 provides a wider angle
of view underwater without the edge distortion, heaviness, or difficult
attachment typically associated with an external wide angle lens. The
WD-4 is a 0.75x magnification factor and simply slides on and off of
the housing’s lens port.
A press-fit Macro Adapter # 9306.78 is available for the attachment
of 67mm threaded accessory macro lenses. We recommend a macro
lens which is designed for underwater use like those from Epoque,
INON, Subsee, Nauticam, and other manufacturers. The adapter
should not be used with 67mm threaded wide angle lenses. The wide
angle lens would be too far away from the camera’s lens to provide an
improved image.
For additional information, refer to the product webpage at ikelite.
com.
