Ikelite 40230AU, Руководство пользователя, Страница: 15 / 20

15
FULL
•
In ON or ON W/LITE, the flash fires at full power each time.
•
In BATT W/LITE, the video or modeling light will be on at full
intensity.
FRACTIONAL POWERS (-0.5, -1, -1.5, -2, -2.5, -3, -3.5 -4, -4.5)
•
In ON or ON W/LITE, the flash fires at a fractional power setting
each time. The difference between each switch positon is 1/2
f-stop. In photography, a decrease of one f-stop reduces the light in
half. Therefore, the -1 setting is equivalent to 50% flash power.
Positioning the Strobe
•
Use the built-in video or modeling light to make sure your strobe is
positioned in the correct location in relation to your camera frame.
•
Adjust the angle of the strobe as the distance between you and
your subject changes.
Firing the Strobe
•
Test fire your system on the surface prior to gearing up for your
dive. Make sure that the strobe fires during your photo at the
exposure level you expect.
•
The Ready Light LED on the side of the strobe will glow red when
the strobe is ready to fire.
•
The Ready Light LED doubles as a confidence signal. The LED
will momentarily glow green after the strobe fires if the strobe has
received a TTL quench signal.
•
If the Ready Light does not glow red, check that the battery pack
is fully charged and the strobe power switch is set to the ON or ON
W/LITE position.