Ikelite 40230AU, Руководство пользователя, Страница: 12 / 20

12
2. Lightly lubricate the connector o-ring. We recommend using only
Ikelite silicone lubricant to eliminate the possibility of swelling due to
incompatible compounds.
3. Line up the pins and receptacles and insert the sync cord plug into
the bulkhead. The plug should slide easily into the bulkhead. If you
feel resistence, do not force it. Remove the plug and check
alignment.
Waterproof
bulkhead cap
Bulkhead
4. Rotate the knurled retaining ring until snug on the housing
bulkhead. Do not use pliers or tools to tighten the retaining ring.
Using Your Strobe
Checking Battery Level
When the switch is rotated to the Batt w/Lite position, the strobe
will fire one test shot and the Fuel Gauge will indicate approximate
remaining battery level. Each LED represents approximately 25% of
the battery capacity.