Ikelite 40230AU, Руководство пользователя, Страница: 10 / 20

10
GREEN
The charging indicator LED on the front of the charger glows green
when the charger is plugged into a power source and when the pack
is fully charged. When glowing green the charger is in trickle charge
mode.
RED
The charging indicator LED glows red when charging the pack. Typical
charge time is 4 hours.
RED/GREEN ALTERNATING
The charging indicator LED alternates red and green lights when
attempting to pulse charge a deeply depleted battery pack up to a
usable voltage. If the charger does not switch to a solid red light within
a few minutes it is time to replace the battery pack.
Attaching the Battery Pack
» Never attach a water damaged battery pack to a strobe. Use of
a water damaged battery pack is a safety risk and can cause
damage to the strobe electronics.
» Do not lubricate the battery pack o-ring.
1. Turn the Power Switch to the OFF Position and place the strobe
face down on a flat surface.
2. Check that the o-ring is in place and that the sealing surfaces are
clean. Do not lubricate the o-ring.
3. Place the toggle lock in the open position by sliding out, flipping up,
and rotating 90 degrees counter-clockwise.
4. Align the battery pack with the front of the strobe. The switches on
the side of the strobe and battery pack will line up when properly
oriented.
5. Press the battery pack down gently but firmly until it is flush with
the strobe front.