ikeGPS ike100, Руководство пользователя

Страница: 24 / 132

www.ikegps.com/quickstart Page 20 www.ikegps.com/support

Note the direction that the ike is facing (e.g. identify a
recognizable object / landmark in this direction).

During the steps on the following pages, try to keep the
front section of the ike aligned with your reference direction
as shown.

Tap the screen to continue.

In the rotation screen, review the video which illustrates the
movement required
o
The videos are taken from the user’s perspective when
facing in the reference direction.
o
Note that the movements required for the compass
calibration may take a couple of attempts to master.
Don’t worry if you get it wrong, the calibration application
will prompt you to repeat any step that was not
completed correctly.
o
Aim to be halfway through the rotation when the count
gets to 5.
o
For each rotation, the key is to keep the ike aligned with
the reference direction as shown.

When you are ready, tap the screen to start.

You will be given a
countdown ‘Ready, Set, Go’ and a 10 second count will begin for each
required rotation.

Rotate your ike smoothly in the manner shown during the 10 second count, maintaining
alignment with the direction reference noted earlier.

If you move too far from alignment you will be warned with a tone. The faster the tone
beeps, the further the ike is from the correct alignment. Use the bar indicator on the bottom
of the screen to help guide you back to the correct alignment.

Once the 10 second count has finished, the data collected will be assessed for alignment
and rotational quality.

If the ike has strayed too far from the correct alignment, the
error
“The magnetic north alignment was poor. Keep the
indicator bar green.”
will be displayed.