Ikegami SDR-104, Руководство пользователя

Страница: 54 / 117

54

To save current camera number, select Preset No and button click.

To move to preset, select preset No and button click.

Available 1 ~ 255 Preset numbers can saved it depends on camera specification.

As explained earlier in 4.4.2., press Menu button to pop-up PTZ camera OSD setup screen and set up Tour and Pattern
items.
-
Since these functions make use of a memory function of the camera itself, user should set them in Camera OSD.
-
Once user completes the setup, close the Camera OSD menu.
-
User can conveniently use Tour and Pattern functions simply by clicking Tour and Pattern buttons.
-
Particulars on how to setup each function on OSD Menu are found in the manual of a corresponding camera.
(NOTE)
Suppose a command for using Tour function is 71 ~ 79 + PSET and if you had set Tour to 70, use Preset No: 1 ~ 9 + Tour
button to benefit the Tour function (70 + 1~9).
5.1.6 System Log

Press EVENT key and the System Log screen will appear.

Please refer ‘SETUP>SYSTEM>System Log’ to learn different events listed on the System Log and see how to delete the
System Log.
5.1.7 Key Lock

Press AUDIO > FF > FORWARD keys in sequence to operate the key lock function. This function is indicated by icon in
the lower portion on the right-hand side of the screen.

Once the Key Lock function is on, user cannot use any key. If wish to use a key, please enter the correct password to
release the key lock function. If Password is not required, simply press ENTER

key.
5.1.8 Emergency Recording

When user presses EMERGENCY key, recording starts right away regardless of preset recording mode.

Emergency recording is not operated while SETUP.