12
Power cable
Remove about 10 mm from the end of the power cable. The thickness of cables for connection
should be AWG24-12.
Remove about 10 mm.
• Do not use simultaneously with AC adapter.
• When supplying AC24V, do not use simultaneously with PoE.
• When DC12 power has been supplied simultaneously with PoE, the method that was turned
on first has priority.
7-3. Supplying power with PoE
When supplying power to this equipment with PoE, connect as shown in the figure below.
Prior to connecting, first make sure that no power is being supplied to the equipment with
another method.
ETHERNET
LAN cable (category 5e or higher)
HUB for PoE
or
PoE power
supply adapter
• PoE operates with Type A or Type B.
• Do not use simultaneously with AC24V from terminal block 2.
• If DC12V from the AC adapter or terminal block 2 is supplied simultaneously with PoE, the
method that was turned on first has priority.
