Ikegami IDE-10, Инструкция по эксплуатации

Страница: 13 / 28

10
⑥
Click on “Use the following IP address” and enter the address.
* To return to the original IP address after setting up this equipment, preferably note
down the current IP address.
• Set the IP address at “192.168.1.
○
” (not 150 for the
○
blank).
• Set the subnet mask at “255.255.255.0”.
Initial settings (IDE-10)
URL : http://192.168.1.150/
User name : admin
Password : 1
IP address : 192.168.1.150
Subnet mask : 255.255.255.0
Gateway : 192.168.1.1
MTU : 1454
HTTP port : 80
PC operationg environment
To carry out settings and maintenance
on this device, you must have a PC that
satisfies the following conditions.
• Microsoft Windows XP
• Internet Explorer 6.0 or higher
• Intel Pentium 4 2.0GHz or higher
• Memory 256MB or higher (512MB or
higher recommended)
For reference
The initial values of the IP addresses for products operating with the Ikegami
network are as follows.
Network Camera
: 192.168.1.100
Network Encoder : 192.168.1.100
Network Recoder : 192.168.1.200