Ikegami HLM-3250W, Руководство по эксплуатации

Страница: 24 / 64

- 15 -
4-3 . Descr i pt i on of MENU 1 Funct i ons
* Note the following description on the menu.
The vertical frequency “/60” includes both 60 Hz and 59.94 Hz (60/1.001).
The vertical frequency “/48” includes both 24 psF and 23.98 psF (24/1.001) in SF mode.
The vertical frequency “/24” includes both 24 Hz and 23.98 Hz (24/1.001).
１ ．ＶＢＳ ＦＯ ＲＭＡＴ
２ ． → Ｙ／Ｃ ＳＥＰ．
２Ｄ ＹＣＳ
３ ． → ＮＴＳＣ ＳＥＴ ＵＰ ＬＶＬ ０％
４ ．ＤＶＩ ＦＯ ＲＭＡＴ
５ ． → ＹＰｂＰ ｒ／ＲＧ Ｂ
Ｙ Ｐ ｂＰｒ
６ ．ＣＯＭ Ｐ． ＦＯＲＭ ＡＴ
７ ． → ＹＰｂＰ ｒ
Ｙ Ｐ ｂＰｒ
８ ． → １０３５ ／ １０８０ ｉ １ ０ ８ ０ ｉ
９ ． → ４８０ ｉ Ｓ ＥＴＵＰ ＬＶ Ｌ ０ ％
10．Ｓ ＹＮＣ ＩＮ Ｔ
Ｍ ＥＮＵ １（ＦＯ ＲＭＡＴ ）：１０ ８０ｉ
ＳＥＴ→ Ｅ ＸＩＴ →
ESC ENT
② Setting the decoder Y/C separation
⑥ CM-240: Setting the line format with COMP. inputs
④ Setting the YPbPr/RGB signal format of DVI inputs
① Format display of selected signal
③ Setting the NTSC setup level
⑦ CM-240: Setting the 4801i format setup level
⑧ CM-240: Setting SYNC INT/EXT
⑤ CM-240: Setting the YPbPr/RGB signal format
(The dashed-line-boxed items are effective with the CM-240 mounted.)
①
Format d i splay of selected s i gnal
Shows the format of the currently selected signal.
②
Sett i ng the decoder Y/C separat i on
For the Y/C separation of VBS (composite) signals,
set any of the following three types of formats.
• 2DYCS: two-dimensional comb filter
• 3DYCS: three-dimensional comb filter
• TRAP : trap filter
This function can be assigned with the F1 F2
switch on the front panel.
• Default setting is 2DYCS.
③ Sett i ng the NTSC setup level
Used to set the setup level at the time of NTSC
signal input. When the black level of the signal
has 7.5% setup, it is set to "7.5%".
• Default setting is 0%.
④ Sett i ng the YPbPr/RGB s i gnal format of DVI i nputs
Used to set the DVI input signal format to
YPbPr or RGB.
• Default setting is YPbPr.
⑤
CM-240 : Sett i ng the YPbPr/RGB s i gnal format
Used to set the component input signal format to
YPbPr or RGB when the optional CM-240 is
mounted.
• Default setting is YPbPr.
* This item is selectable only when the CM-240
(option) is mounted.
⑥
CM-240 : Sett i ng the l i ne format w i th COMP . i nputs
Used to set the component signal to “1035i” only
in the 1035i/60 format input when the optional
CM-240 is mounted.
• Default setting is 1080i/60.
* This item is selectable only when the CM-240
(option) is mounted.
⑦ CM-240 : Sett i ng the 480 i format setup level
Used to set the component signal setup level in
the 480i/60 format input when the optional CM-
240 is mounted. When the black level of the
signal has 7.5% setup, it is set to “7.5%”.
• Default setting is 0%.
* This item is selectable only when the CM-240
(option) is mounted.
⑧ CM-240 : Sett i ng SYNC INT/EXT
With the YPbPr/RGB signal input, set the use of
a sync signal that is separated from the Y or G
on SYNC image signal or the use of a sync signal
that is externally inputted.
This function can be assigned with the F1 F2
switch on the front panel.
• Default setting is INT.
* This item is selectable only when the CM-240
(option) is mounted.