Ikegami HLM-2450WB, Руководство по эксплуатации

Страница: 64 / 68

- 54 -
■
Additional user-set functions
Pin No. Function External Assignment for Function
User setting SHADOW0 on Connect to Pin 1 for running with the shadow level 0% (black).
* Priority is given to this pin function if any other shadow setting pin is pressed at once.
User setting SHADOW20 on Connect to Pin 1 for running with the shadow level 20%.
User setting SHADOW40 on Connect to Pin 1 for running with the shadow level 40%.
User setting SHADOW60 on Connect to Pin 1 for running with the shadow level 60%.
User setting ANALOG PC on Connect to Pin 1 for selecting the ANALOG PC input with CM-175 mounted.
* When all the input select pins are open, the analog composite signal is selected.
User setting 3G-SDI on Connect to Pin 1 for selecting the 3G-SDI input with D3G-240A/D mounted.
* When all the input select pins are open, the analog composite signal is selected.
* The functions of pins other than 1 are freely user-settable on MENU.
Setting of two shadow levels and behavior
The shadow levels can be very quickly switched each other. To do this, make the user setting to assign the
parallel-remote pin functions to “SHADOW0”, “SHADOW20”, “SHADOW40”, “SHADOW60”, etc.
Typical setting procedure and behavior are shown below.
■
Setting procedure
①
First press the “MENU” switch and make the “MENU8” screen appear.
②
Move the cursor to “DEFAULT” and enter “USER” instead.
③
Move the cursor to “P6: (blank)” and enter “P6: SHADOW0” (black) instead.
④
Move the cursor to “P13: SHADOW” and enter “P13: SHADOW40” instead.
* In the above setting, priority is given to Pin 6 if Pins 6 and 13 are pressed at once.
■
Behavior
* The types of markers displayed are those set on “MENU”.
MARKER SHADOW(40%) SHADOW(0%)
Item
Terminal (12) Terminal (13) Terminal (6)
Behavior
1
“
ON” OFF OFF MARKER ON
2
“
ON”
“
ON” OFF MARKER
＋
SHADOW(40%) ON
3
“
ON” OFF
“
ON” MARKER
＋
SHADOW(0%) ON
4
“
ON”
“
ON”
“
ON” MARKER
＋
SHADOW(0%) ON *Priority to 0%
5 OFF
“
ON” OFF SHADOW(40%) ON
6 OFF OFF
“
ON” SHADOW(0%) ON
7 OFF
“
ON”
“
ON” SHADOW(0%) ON *Priority to 0%
MENU8 (Parallel Remote)
1. Pin Function
DEFAULT
P2
：
CH-B P9
：
EXT SYNC
P3
：
(blank) P10
：
16:9
P4
：
G-TALLY P11
：
DVI
P5
：
COMP. P12
：
MARKER
P6
：
(blank) P13
：
SHADOW
P7
：
MONO P14
：
R-TALLY
P8
：
RGB P15
：
SDI
MENU8 (Parallel Remote)
1. Pin Function
USER
P2
：
CH-B P9
：
EXT SYNC
P3
：
(blank) P10
：
16:9
P4
：
G-TALLY P11
：
DVI
P5
：
COMP. P12
：
MARKER
P6
：
SHADOW 0 P13
：
SHADOW40
P7
：
MONO P14
：
R-TALLY
P8
：
RGB P15
：
SDI
②
③
④
①