Ikegami HLM-2450WB, Руководство по эксплуатации

Страница: 20 / 68

- - 10
4
．
MENU Functions
4-1
．
List of MENU
All functions can be executed in the MENU screen.
MENU
MENU1
(FORMAT)
MENU2
(MODE)
MENU5
(VIDEO)
MENU6
(AUDIO)
2.
→
Y/C SEP.
6.COMP. FORMAT
9.
→
1035/1080i
4.DVI FORMAT
1.FUNCTION1 MODE
11.SYNC
4.CHANGE ASPECT
7.TALLY
1.SDI VITC
1.CHROMA GAIN UP
2.IP MODE
1.LINE/SP CH.
2.SP INPUT SEL
3.LEVEL INDICATOR
4.
→
MODE
Setting the decoder Y/C separation
Setting the format with YPbPr/RGB 1125 line inputs
Setting the YPbPr/RGB signal format of DVI inputs
Setting the function assignment of F1(Function 1)switch
Setting SYNC INT/EXT
Setting the automatic/manual aspect ratio change as per
reception channel
Setting the tally lamp display format
Setting the SDI VITC display ON/OFF
Setting the chroma gain -up ON/OFF
Setting the paired channels of embedded audio outputs
Setting the audio output singals
3.H
ＰOSITION
Setting the IP conversion mode (FIELD/FRAME)
4.V POSITION
Adjusting the horizontal screen position
Adjusting the vertical screen position
6.
→
DIMMER
5.
→
CHANNEL
3.REMOTE NO. Setting the monitor ID code for remote control
6.BACKLIGHT DIM.
Setting the backlight brightness level
1.VBS FORMAT
3.
→
NTSC SETUP LVL
Setting the NTSC setup level
10.
→
480i SETUP LVL Setting the 480i foemat setup level
9.SDI CH LOCK Setting the SDI channel lock ON/OFF
MENU3
(VITC/WFM/VSC)
8.REAL SCAN
Setting the same-size (dot-by-dot) display ON/OFF
2.
→
DIMMER
3.
→
SIZE
Setting the SDI VITC display brightness
4.WFM DISPLAY
Setting the waveform display ON/OFF
5.
→
DIMMER
6.
→
SIZE
7.
→
POSITION
8.
→
COLOR
2.FUNCTION2 MODE
5.
→
YPbPr/RGB
8.
→
YPbPr/RGB
Setting the YPbPr/RGB signal format of COMP. inputs
Setting the VIDEO line signal of DVI inputs
Setting the VBS input
Various setting of CM-175 COMPONENT inputs
(The dashed-line-boxed items are effective with the CM-175 mounted.)
9.VECTOR SCOPE
10.
→
DIMMER
11.
→
MAGNIFICATION
12.
→
SCALE
13.
→
POSITION
14.
→
COLOR
Setting the audio level meter display ON/OFF
Setting the function assignment of F2(Function 2)switch
Setting the SDI VITC display size
Setting the waveform display brightness
Setting the waveform display size
Setting the waveform display position (right/center/left)
Setting the waveform display color (white/green)
Setting the VECTOR SCOPE display ON/OFF
Setting the VECTOR SCOPE display brightness
Setting the VECTOR SCOPE display magnification ratio
Setting the COLOR BOX scale display (75%/100%)
Setting the VECTOR SCOPE display position (right/center/left)
Setting the VECTOR SCOPE display color (white/green)
Setting the audio level meter display mode
Setting the audio level meter display channel
Setting the audio level meter display brightness
7.
→
INPUT SELECT Setting the analog PC/COMPONENT input selection
5.CONTRAST RANGE
Setting the contrast range (Normal/Wide)
7.
→
PEAK HOLD
Setting the audio level meter display peak hold
MENU4
(SCREEN CAPTURE)
Executing the 2-picture split mode
1.SCR CAPTURE
2.
→
AREA Setting the 2-picture split mode display area
10.SDI ERROR LED
Setting the SDI ERROR LED display ON/OFF
11.FORMAT DISPLAY
Setting the format display ON/OFF/TIMER at signal switching
5.CONT VR ASSIGN Setting the assignment of “CONT” manual control
(next page)