Ikegami HLM-2450WB, Руководство по эксплуатации

Страница: 25 / 68

- - 15
4-3
．
Description of MENU 1 Functions
＊
Note the following description on the menu.
・
The vertical frequency “/60” includes both 60 Hz and 59.94 Hz (60/1.001).
・
The vertical frequency “/48” includes both 24 psF and 23.98 psF (24/1.001) in SF mode.
・
The vertical frequency “/24” includes both 24 Hz and 23.98 Hz (24/1.001).
１．ＶＢＳ ＦＯＲＭＡＴ
２．→Ｙ／Ｃ ＳＥＰ．
２ＤＹＣＳ
３．→ＮＴＳＣ ＳＥＴＵＰ ＬＶＬ ０％
４．ＤＶＩ ＦＯＲＭＡＴ
５．→ＹＰｂＰｒ／ＲＧＢ
ＹＰｂＰｒ
６．ＣＯＭＰ． ＦＯＲＭＡＴ
７．→ＩＮＰＵＴ ＳＥＬＥＣＴ
ＶＩＤＥＯ
８．→ＹＰｂＰｒ ＹＰｂＰｒ
９．→１０３５／１０８０ｉ １０８０ｉ
10．→４８０ｉ ＳＥＴＵＰ ＬＶＬ ０％
11．ＳＹＮＣ ＩＮＴ
ＭＥＮＵ１（ＦＯＲＭＡＴ）：１０８０ｉ
ＳＥＴ→ ＥＸＩＴ→
E S C ＥＮＴ
②
Setting the decoder Y/C separation
⑦
CM-175: Setting the line format with COMP. input
④
Setting the YPbPr/RGB signal format of DVI inputs
①
Format display of selected signal
③
Setting the NTSC setup level
⑧
CM-175: Setting the 480i format setup level
⑨
CM-175: Setting SYNC INT/EXT
⑥
CM-175: Setting the YPbPr/RGB signal format
（
The dashed-line-box items are effective with the CM-175 mounted.
）
⑤
CM-175: Setting between analog PC snd COMPONENT input signals
①
Format display of selected signal
・
Shows the format of the currently selected signal.
②
Setting the decoder Y/C separation
・
For the Y/C separation of VBS (composite) signals,
set any of the following three types of formats.
・
2DYCS : two-dimensional comb filter
・
3DYCS : three-dimensional comb filter
・
TRAP : trap filter
・
This function can be assigned with the F1 F2
switch on the front panel.
・
Default setting is 2DYCS.
③
Setting the NTSC setup level
・
Used to set the setup level at the time of NTSC
signal input. When the black level of the signal
has 7.5% setup, it is set to "7.5%".
・
Default setting is 0%.
④
Setting the YPbPr/RGB signal format of DVI
inputs
・
Used to set the DVI input signal format to YPbPr
or RGB.
・
Default setting is YPbPr.
⑤
CM-175: Switching between analog PC and
COMPONENT input signals
・
PC
：
Analog PC input of the CM-175 is
selected.
・
VIDEO
：
COMPONENT input of the CM-175 is
selected.
・
This function can be assigned with the F1 F2
switchon the front panel.
・
Default setting is VIDEO.
⑥
CM-175: Setting the YPbPr/RGB signal format
・
Used to set the component input signal format to
YPbPr or RGB when the optional CM-175 is
mounted.
・
Default setting is YPbPr.
※
This item is selectable only when the CM-175
(option) is mounted.
⑦
CM-175: Setting the line format with COMP.
inputs
・
Used to set the component signal to “1035i” only
in the 1035i/60 format input when the optional
CM-175 is mounted.
・
Default setting is 1080i/60.
※
This item is selectable only when the CM-175
(option) is mounted.
⑧
CM-175: Setting the 480i format setup level
・
Used to set the component signal setup level in
the 480i/60 format input when the optional
CM-175 is mounted. When the black level of the
signal has 7.5% setup, it is set to “7.5%”.
・
Default setting is 0%.
※
This item is selectable only when the CM-175
(option) is mounted.
⑨
CM-175: Setting SYNC INT/EXT
・
With the YPbPr/RGB signal input, set the use of a
sync signal that is separated from the Y or G on
SYNC image signal or the use of a sync signal
that is externally inputted.
・
This function can be assigned with the F1 F2
switch on the front panel
・
Default setting is INT.
※
This item is selectable only when the CM-175
(option) is mounted.