6
Other Settings
Unpair Bluetooth devices
Press and hold the knob (1). Release the knob when the LED
light turns red the first time.
A confirmation sound will be played.
(Note that on some phone models you also need to remove
ENEBY20/30 from the phone’s paired devices list to be able to
pair again.)
Set up a stereo pair
You can pair two identical ENEBY speakers to create a wider
stereo experience. In this configuration, one speaker serves
as the left channel and the other serves as the right channel.
On/Off and Volume need to be controlled individually on each
speaker.
1. Turn on both speakers.
2. Press and hold the knobs (1) at the same time. Release the
knobs when the LED light turns red the second time.
Wait 2 seconds. A confirmation sound will be played.
3. Press the knob (1) once again on one of the speakers.This
speaker is now assigned as the left channel.
4. Open the Bluetooth setting on your mobile device and
connect to ENEBY speaker for the left channel.
To disable the stereo pair, follow instructions “Unpair
Bluetooth devices” on both speakers.
Set bass and treble
Press and hold the knob (1). Release the knob when the LED
light turns red the third time.
This activates the bass setting. The LED light flashes slowly.
Turn left/right to adjust the bass. Confirm the bass setting
and activate the treble setting by pressing the knob once. The
LED light flashes quickly. Turn left/right to adjust the treble.
Confirm by pressing the knob once and this also exits the
sound settings.
Disable the auto-off
function
Press and hold the knob (1). Release the knob when the LED
light turns red the fourth time.
A confirmation sound will be played. ENEBY will now not turn
off automatically.
Factory reset
Press and hold the knob (1). Release the knob when the LED
light turns red the fifth time (after approximately 30 seconds).
A louder confirmation sound will be played. The factory reset
will clear all Bluetooth devices and sound settings, and it will
activate the auto-off function.