5
Getting started:
1. Connect mains cord into AC In (2)
connector.
2. A quick press on the knob (1) turn
the speaker On. ENEBY 20/30 starts
to search for paired devices. If a
paired device is found, the LED shines
without blinking and your speaker is
ready to use.
3. If no device is found the speaker
LED continues to blink and enters
pairing mode automatically. Go to
the Bluetooth settings in your mobile
device and connect to ENEBY 20/30.
The LED should now stop blinking
and your speaker is ready to use.
If no music has been playing for
20min, the speaker will enter sleep
mode.
Adjust Volume
Turn the knob (1) left to decrease or turn
it right to increase volume level.
Add additional Bluetooth device(s)
(max 8 devices)
1. Make sure no other device is paired
and in range to the speaker.
2. Go to your Bluetooth menu on your
mobile device and connect to ENEBY
20/30.
3. Once Bluetooth connection is
established, the white LED stops
blinking.
Unpair Bluetooth device
Go to your Bluetooth menu on your
mobile device and unpair ENEBY 20/30
from your devices.
Play music from external source:
Connect a portable audio device to the
AUDIO IN (3) jack on the rear panel.
The speaker automatically detects the
external input and disables Bluetooth
functionality. Use a 3.5mm 3-pol Audio
cable for this feature.
Use speaker throughout home:
ENEBY 20 has the possibility to be
portable. ENEBY battery pack is sold
separately.
• To insert the battery, open the
compartment lid (5) and insert the
battery in the correct direction.
• The battery is charging in the product
when mains cord is connected and the
speaker is turned on.
• When battery is low a red LED in the
knob (1) will flash. During charging the
red LED is on.
Attach Speaker to a wall or a stand:
ENEBY wall mount and ENEBY stand are
accessories and are sold separately.
Use holes (4) and included screws to
mount stand or wall mount. Do not over
tighten the screws.